Well come to/ مرحبا بكم

 Column Jacketing is a technique used to increase the strength of existing structural members (e.g. Columns, Beams, etc.) Column Jacketing is a method of structural retrofitting and strengthening It is used to increase bearing load capacity.  

 Plinth protection usually is done by pouring approximately 100 – 150 mm layers of reinforced micro concrete along the edge of the building. 

Gardening and watering outside the building lacking plinth protection cause water to enter the building through the masonry wall. 

Carbon fiber wrapping for columns improves the structure's performance against seismic activity.

Carbon wrapping for columns is an ideal alternative to the traditional method of structural strengthening.

Fiber-wrapping concrete columns act as a shield against corrosion. The carbon fiber wraps concrete repairs and reinforces the concrete structures.

 Steel jacketing refers to encasing the section with steel plates and filling the gap with non-shrink grout. It is a very effective method to remedy the deficiencies such as inadequate shear strength and inadequate splices of longitudinal bars at critical locations. 

 Epoxy injection is an economical method of repairing non-moving cracks in concrete walls, slabs, columns, and piers and can restore the concrete to its pre-cracked strength. Before doing any injection, it is necessary to determine the cause of the crack. 

PU Resin

PU Arcralate.

Basement wall Leaks

 Micro concrete can be used in the repair of damaged reinforced concrete structures such as columns, beams & walls where compaction is impossible and access is restricted. For Jacketing or retrofitting of RCC reinforced column to increase load taking capacity. (Vertical member strengthening). 

 Epoxy injection is an economical method of repairing non-moving cracks in concrete walls, slabs, columns and piers and is capable of restoring the concrete to its pre-cracked strength. Prior to doing any injection it is necessary to determine the cause of the crack. 

 Latex polymer coating solution is always mixed with cement to waterproof the required area. A layer of this mixture is applied as needed. Because of its poor flexibility, Latex coating isn't much of a high-quality coating. 

No need to Break tiles. Economical Solution. They are widely accepted.

  External wall insulation can reduce heat loss and improve airtightness by helping seal off the wall's cracks and holes. 

 Common problems include damp patches on walls, mold growth, and cracking or bulging of the render or brickwork. Problems can also occur if the insulation is not adequately protected from the weather, or if it is installed on a property that is not suitable for it. 

Theet membrane systems are reliable and durable thermoplastic waterproofing solutions that can fulfill the requirements of even the most demanding below-ground structures, including those exposed to highly aggressive ground conditions and stress. 

4-mm Bituminius Sheets.

Thermal Plastics.

GRP lining Expoxy Resin. 

Compound Wall of cracks and Water seepage  Here, we’ll show you a simple, effective way to patch cracks in poured concrete walls.

If you notice large, recurring cracks or bulding walls at your house, don’t try to fix these conditions yourself. The cracks might indicate a more serious structural problem; call in a structural engineer for an in-depth evaluation.

.

 Plaster cracks are small fractures within plastered walls. While they may sound concerning, most plaster cracks are extremely common and cause sepage. 

 Cracks can be a sign of RCC or plaster damage, and it's true that cracks are part of the history of buildings. They are, however, also signs of structural weakness that can lead to further problems if not fixed